ETRX2 'CF' Compact Flash Card

Telegesis has developed a ZigBee node which can be used in a PDA with a CF slot or in a Laptop computer with an PCMCIA/CF adaptor. The CF Card is a fully featured and functioning ETRX2 module and therefore all the usual Telegesis AT-style commands are available via a virtual com port.

ETRX2CF acts as a CF/PCMCIA to serial bridge connected to an ETRX2 module
Driver support for Pocket PC and Windows
Telegesis Terminal support for Windows
Allows access to the ETRX2 AT-Command line interface via a virtual com port
Extended Compact Flash type II form factor
Antenna is housed in the extension of the card - external to the PC/PDA
Supports low power modes

Software for Windows based Laptops

When installed with an appropriate adaptor in the PCMCIA slot of a laptop, the standard Telegesis Terminal software will perform in exactly the same way as with the ETRX2DV Development Board once the correct driver has been installed. Download the manual here for instructions

ETRX2CF and ETRX2CF-PA - driver for windows

Download ETRX2CF and ETRX2CF-PA driver for Version 2 card

Download ETRX2CF driver for original card

Software options for ETRX2CF and CF-PA used in a PDA & CE platforms

Telegesis Terminal PPC for PDA - download the newly enhanced Telegesis Terminal PPC demonstration software. There are two methods of installation. one using ActiveSync on a PC and the other is to load a CAB file into the PDA and then install from there. Software and drivers are  identical so the choice depends on your preferred method of installation.

Drivers for PDA only - if you are developing your own Windows CE / Pocket PC (including CE.NET and Windows Mobile) software applications for a PDA and only require drivers.

Method One - Self-extracting installation file run from Windows PC which transfers the appropriate drivers to the PDA using ActiveSync.

Download Drivers Drivers for PDA only - ActiveSync

Method Two - This is a zip file containing CAB files. Use the appropriate CAB file for your type of PDA and copy directly to the PDA using memory card, infra-red etc. Then on the PDA, select the CAB file and the driver will auto install

Download Drivers Drivers for PDA only - CAB

Telegesis Terminal PPC for PDA - download the newly enhanced Telegesis Terminal demonstration software. There are two methods of installation, one using ActiveSync on a PC and the other is to load a CAB file into the PDA and then install from there. Software and drivers are the same so choice depends on your preferred method of installation.

Method One - Self-extracting installation file run from Windows PC which transfers Telegesis Terminal PPC to the PDA using ActiveSync.

Download Telegesis Terminal PPC for PDA - ActiveSync for R2xx

Download Telegesis Terminal PPC for PDA - ActiveSync for PRO R3xx

Method Two - This is a zip file containing Telegesis Terminal PPC as CAB files. Copy directly to the PDA using memory card, infra-red etc. Then on the PDA, select the CAB file and the Telegesis Terminal PPC software will auto install.

Download Telegesis Terminal PPC for PDA - CAB for R2xx

Download Telegesis Terminal PPC for PDA - CAB for PRO R3xx

Please see Manuals section for instructions

OEM format

The ETRX2CF is also available as an OEM product;

Without the Telegesis AT command set - Ember's Development Kit can be used to develop your own firmware application.

Available with or without casing.

Your own logos and artwork printed straight onto the case.

For further information on OEM format options and prices, please contact us directly at OEM@telegesis.com

Download - Telegesis ETRX-2 CF product brief

Download - Telegesis ETRX-2 CF product manual

Request a quotation